← Back to generator

James as a flat LEGO® brick mosaic

This is James as a flat mosaic seen from above: 35 plates over 2 baseplates. It's the version you frame or hang on a door.

JAMES

About this design

James has 5 letters and takes 35 plates in 4 sizes. The mosaic only uses 1- and 2-stud plate bands, the ones LEGO sells loose. At this piece count it helps to build letter by letter and check the spacing as you go.

Piece inventory

Building James takes 35 plates in 4 different sizes: 24 of 2×2, 8 of 2×10, 2 of 2×4 and 1 of 2×8. The 2×2 ones are 69% of the total, so those are the ones to keep spare. By colour that is 11 blue, 9 red, 8 yellow and 7 green. The same name in 3D goes up to 65 pieces, 30 more, and needs 2 baseplates instead of 2.

Pieces by size
SizeUnits
2×224
2×108
2×42
2×81

Letter by letter

The 5 letters of James don't cost the same: J with 6, A with 8, M with 11, E with 5 and S with 5. M is the priciest at 11 plates and S the cheapest at 5.

Pieces per letter
JAMES
681155

Size and space

The James mosaic spreads over 2 baseplates of 32 × 16 studs, about 25.6 cm wide each. It sits flush with the plate, one plate thick.

S, M or L: what changes

The generator offers three sizes, and for James the gap is wide: 43 plates at S, 35 at M and 86 at L. At L the name stretches to 25.6 cm and needs 3 baseplates, so it's the choice to make before buying any bricks.

The name at each size
Size Pieces Width Baseplates
S4325.6 cm1
M3525.6 cm2
L8625.6 cm3

Ideas for this name

How to customize

  1. Open the generator with James pre-filled, in the flat view.
  2. Gather the 35 plates — most of them are 24 of 2×2.
  3. Lay out 2 baseplates of 32 × 16 studs and spread the 5 letters across them.
  4. Check the preview before you fix the plates down.

The other view

What if you stood it up instead, with letters that have real volume?

See James in 3D

Customize in the generator