← Back to generator

Sophia as a flat LEGO® brick mosaic

This is Sophia as a flat mosaic seen from above: 41 plates over 2 baseplates. It's the version you frame or hang on a door.

SOPHIA

About this design

Sophia has 6 letters and takes 41 plates in 2 sizes. The mosaic only uses 1- and 2-stud plate bands, the ones LEGO sells loose. At this piece count it helps to build letter by letter and check the spacing as you go.

Piece inventory

Building Sophia takes 41 plates in 2 different sizes: 29 of 2×2 and 12 of 2×10. The 2×2 ones are 71% of the total, so those are the ones to keep spare. By colour that is 12 red, 10 green, 10 yellow and 9 blue. The same name in 3D goes up to 73 pieces, 32 more, and needs 2 baseplates instead of 2.

Pieces by size
SizeUnits
2×229
2×1012

Letter by letter

The 6 letters of Sophia don't cost the same: S with 5, O with 8, P with 6, H with 9, I with 5 and A with 8. H is the priciest at 9 plates and I the cheapest at 5.

Pieces per letter
SOPHIA
586958

Size and space

The Sophia mosaic spreads over 2 baseplates of 32 × 16 studs, about 25.6 cm wide each. It sits flush with the plate, one plate thick.

S, M or L: what changes

The generator offers three sizes, and for Sophia the gap is wide: 53 plates at S, 41 at M and 106 at L. At L the name stretches to 25.6 cm and needs 3 baseplates, so it's the choice to make before buying any bricks.

The name at each size
Size Pieces Width Baseplates
S5325.6 cm1
M4125.6 cm2
L10625.6 cm3

Ideas for this name

How to customize

  1. Open the generator with Sophia pre-filled, in the flat view.
  2. Gather the 41 plates — most of them are 29 of 2×2.
  3. Lay out 2 baseplates of 32 × 16 studs and spread the 6 letters across them.
  4. Check the preview before you fix the plates down.

The other view

What if you stood it up instead, with letters that have real volume?

See Sophia in 3D

Customize in the generator