← Back to generator

Oliver as a flat LEGO® brick mosaic

This is Oliver as a flat mosaic seen from above: 40 plates over 2 baseplates. It's the version you frame or hang on a door.

OLIVER

About this design

Oliver has 6 letters and takes 40 plates in 3 sizes. The mosaic only uses 1- and 2-stud plate bands, the ones LEGO sells loose. At this piece count it helps to build letter by letter and check the spacing as you go.

Piece inventory

Building Oliver takes 40 plates in 3 different sizes: 30 of 2×2, 9 of 2×10 and 1 of 2×8. The 2×2 ones are 75% of the total, so those are the ones to keep spare. By colour that is 13 yellow, 10 blue, 10 green and 7 red. The same name in 3D goes up to 70 pieces, 30 more, and needs 2 baseplates instead of 2.

Pieces by size
SizeUnits
2×230
2×109
2×81

Letter by letter

The 6 letters of Oliver don't cost the same: O with 8, L with 5, I with 5, V with 9, E with 5 and R with 8. V is the priciest at 9 plates and E the cheapest at 5.

Pieces per letter
OLIVER
855958

Size and space

The Oliver mosaic spreads over 2 baseplates of 32 × 16 studs, about 25.6 cm wide each. It sits flush with the plate, one plate thick.

S, M or L: what changes

The generator offers three sizes, and for Oliver the gap is wide: 49 plates at S, 40 at M and 98 at L. At L the name stretches to 25.6 cm and needs 3 baseplates, so it's the choice to make before buying any bricks.

The name at each size
Size Pieces Width Baseplates
S4925.6 cm1
M4025.6 cm2
L9825.6 cm3

Ideas for this name

How to customize

  1. Open the generator with Oliver pre-filled, in the flat view.
  2. Gather the 40 plates — most of them are 30 of 2×2.
  3. Lay out 2 baseplates of 32 × 16 studs and spread the 6 letters across them.
  4. Check the preview before you fix the plates down.

The other view

What if you stood it up instead, with letters that have real volume?

See Oliver in 3D

Customize in the generator